Rain Gauge TS221

Pluviometro, Sensor de precipitación TS221

Featured Features:

  • Great robustness.
  • High accuracy.
  • Calibrated pickup ring.
  • Reed switch and magnet detection.
  • Buckets of 0.10; 0.20; 0.25; or 0.50.

Its construction with stainless materials makes it highly reliable and unalterable even in severe environmental conditions.

The rain is collected in a 200 mm diameter catchment with a metal beveled calibrated ring and driven by a funnel to a stalnless steel tiltinq bucket.

The water then goes to a smaller funnel where the discharge of water is produced by drops and at a constant distance to the bucket, thus ensuring a very good repeatability.

The angle and depth of the collecting funnel and the upper inlet filter prevents rebounds at high intensities and by means of a mesh filter system in the inner collector prevents passageto the bucket of suspended materials and insects.


Sensor: Tipping Bucket, built in stainless steel
Sensitivity: 0.10; 0.20; 0.25 or 0.50 mm (0,25 mm standard)
Orifice Diameter: 200mm ±0.3mm
Accuracy: ±1 % at 50mm/h
Detector: Reedswitch activated by a magnet.
Dimensions: Outside diameter 226 mm. height 430 mm
Leveling: Bubble level
Connection Cable: Length 10 m
How to order TS221XX Indicate bucket sensitivity
download technical sheet


  • Rain Gauge, Model AS 222 for mounting 1.5 m from the floor mariufactured in treated steel.
  • AS 224 electric heater with power supply and electronic thermostat